NVT NV-226J-PV Wireless Transmitter / Receiver

Products and parts from NVT.

Features:

• Extended distance camera power and video routed through UTP and RJ45
• Supports 12VDC cameras with onboard regulated power
• Use with NVT's PVD™ Power Supply Hubs and Cable Integrators
• Up to 3,000ft (1km) with a NVT DigitalEQTM Hub or active receiver, (see Power Distance Chart)
• Up to 1,500ft (460m) with a NVT StubEQTM Hub
• Frequency response DC to 10MHz (see Recommended Distance Chart)
• Up to 750ft (225m) with NVT's Passive Receiver Hubs (see Power Distance Chart)
• Exceptional interference rejection
• Built-in transient protection
• Limited lifetime warranty

The NV-226J-PV Video Transmitter +12VDC Converter is a passive (non-amplified) video transmitter combined with a 24VACto-12VDC converter. Designed to fit on the back of a fixed 12 VDC camera, this unit is architected to convert 24VAC power from the control room, while delivering real-time baseband (composite) video at extended distances, all over one 4-pair UTP cable.

The unparalleled interference rejection and low emissions of the NV-226J-PV allows video and lowvoltage power to coexist within the same 4-pair cable, using structured (EIA 568B) wiring practices. It is recommended that the 24VAC not share the same jacketed wire bundle with telecom or datacom signals.

The NV-226J-PV carries a limited lifetime warranty, is UL and cUL listed, and is CE, WEEE, and RoHs compliant.